Copper TubeAdhesiveBall ValveBlast Freezer and Blast Chiller Blower WheelBrazing TorchChiller (for AC)Coldroom PanelscompressorCompressor OilCondenserCondensing UnitCopper FittingsDigital Leak DetectorDigital ThermometerDrain Cleaning MachineElectronic Expansion ValveEvaporator and Unit CoolerExpanderExpansion JointExpansion ValveFilter Drier & System ProtectorFin Straightener Fire Protection ProductsFlaring And Swaging ToolFlexible Metal HosesGelato EquipmentHVAC&R Chemicals SolutionsInsulationKitchen EquipmentsManeurope Comp. Selection Guide ManifoldManifold Charging HosesMAPP PROMicro ChannelMinicut I Pro and II ProMultideck Oil Regulator Oil ReservoirOil SeperatorPinch Off PlierPressure ControllerPressure GaugeQuick CouplerRachet WrenchRecovery TankRecovery UnitRefrigerantSight GlassSolenoid ValveSpring BenderSuction AccumulatorSupermarket & Kitchen EquipmentSwaging PunchTapeTee Extractor Sets 22124Temp ControllerTemperature Monitoring ControllerTPI Tube Bender Tube CutterV-Coil Housing CDU SystemsVacuum PumpValveVibration HoseWater PumpOthers

Lan Hoe Enterprise (1979) Sdn Bhd
24, Jalan 6/91,
Taman Shamelin Perkasa,
56100 Cheras,
Kuala Lumpur, Malaysia.
+603-9281 1323
+603-9282 4609

1 1/8" - Sanhua Suction Accumulator (AC-PA153010)

1 1/8" - Sanhua Suction Accumulator (AC-PA153010)

1 1/8" - Sanhua Suction Accumulator (AC-PA153010)

Weight: 5.75 kg
RM 108.00 Out of Stock
Accumulator P Series
P series accumulator is installed between the suction port of the refrigerating system compressor and evaporator to separate gas and fluid, store fluid, return oil and filter.


  •  Size L x W x H = 40 x 16 x 16 (cm)
  •  Inlet and outlet are made of copper tubes
  •  The air guiding part direct the refrigerant toward the wall which forms a slipstream to make the refrigerant expand quickly and slow the flow to let the liquid drop down. This effectively separates the liquid and gas
  •  The U tube design guarantees a max flow of refrigerant and stops little lubrication oil. The inlet of U tube is behind air guiding part which can prevent the liquid from entering the compressor. At the same time, it can change the direction of refrigerant to completely separate        the liquid and gas
  •  The balancing hole in the upper U tube can effectively eliminate the siphon caused the restart of the system so as to avoid excessive          liquid entering the compressor
  •  The oil return hole is matching the system capacity to optimize the flow of liquid refrigerant and lubrication oil into the compressor
  •  Connection tube, U tube, and volume of the accumulator is designed based on the basic demand of Heat pump system including safety store capacity (vs. total capacity); protective flow control back to compressor allows a proper and reliable liquid refrigerant and lubrication oil back to the compressor. This combination is to achieve a minimum pressure drop and largest refrigerant capacity
  •  Powder coated surface can survive 500hours of salt spray test
  •  The incorporated fuse of 430F

General Specifications

  •  Applicable refrigerant: CFC, HCFC, HFC etc.
  •  Applicable medium temperature: -30°C to +120°C (-22°F to 240°F)
  •  Applicable ambient temperature: -35°C to +55°C (-22°F to 131°F)
  •  Maximum working pressure: 2.5MPa
  •  Certification: UL, CSA and PED
Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
Ship to Name  
Shipping Address  

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
available in